बहुत सारे नए Electricians के mind में सबसे पहला practical सवाल यही आता है —“Earthing pit कितना बड़ा होना चाहिए?” Electrical safety में Earthing उतनी ही जरूरी है जितनी wiring और MCB selection।
Proper Earthing household appliances, industrial machinery, inverter systems और solar installations को shock & fault current से protect करता है।
इस blog में हम सीखेंगे:
✔ Earthing pit का ideal size क्या होता है?
✔ मिट्टी के हिसाब से depth कैसे change होती है?
✔ Earthing pit installation कैसे करें?
✔ Earthing pit resistance value कितनी होनी चाहिए?
✔ Earthing testing methods क्या हैं?
यह complete guide beginners, ITI students और working electricians के लिए तैयार की गई है।
Earthing Pit क्या होता है?
Earthing Pit एक गहरा गड्ढा होता है जिसे जमीन में इस लिए बनाया जाता है ताकि बिजली के fault current को सुरक्षित तरीके से earth में भेजा जा सके। इस pit के अंदर copper या GI plate, earthing strip, कोयला, नमक और नम मिट्टी की layers डाली जाती हैं। ये material current को आसानी से जमीन तक पहुंचाने का काम करते हैं।
Earthing Pit घर, inverter system, industry और electrical panels की safety के लिए बहुत जरूरी है — क्योंकि जब भी कोई leakage या fault होता है, तो यही गड्ढा बिजली को जमीन में absorb कर लेता है और shock या fire के risk को कम कर देता है। इसलिए एक properly designed Earthing Pit electrical system की backbone माना जाता है।
Earthing Pit का Ideal Size क्या होता है?
Standard Recommended Size:
- चौड़ाई — Minimum 3 feet
- Depth — 8 ते 10 feet
यह size मिट्टी के साथ अच्छा contact देता है जिससे earthing resistance value कम रहती है।
Soil Type के हिसाब से Earthing Pit Size
Soft/Moist Soil
- Depth: 6–8 feet
यहाँ moisture naturally available होता है इसलिए shallow pit work करता है।
Dry / Rocky Soil
- Depth: 10–12 feet
यहाँ resistance high होता है इसलिए ज्यादा depth best रहती है।
Earthing Pit Types
Electrical field में Earthing Pit कई प्रकार के होते हैं—soil condition, installation budget और maintenance requirement के हिसाब से different options choose किए जाते हैं। सबसे common और practical Earth Pit types ये हैं:
1. Plate Earthing Pit
इस method में Copper या GI Plate जमीन में vertically install की जाती है।
✔ घरों, industries और commercial buildings में widely used होती है।
✔ Proper backfilling (charcoal + salt + moist soil) से resistance low मिलता है।
2. Pipe Earthing Pit
Pipe Earthing इसमें GI Pipe ground में vertically डाली जाती है और holes drilled रहते हैं जिससे moisture contact बना रहे।
✔ Rural या soft soil areas में economical option है।
✔ Simple maintenance और installation।
3. Chemical Earthing Pit
इस pit में chemical compounds या conductive gel use किया जाता है—जो मिट्टी को wet और conductive रखता है।
✔ Rocky या dry soil के लिए सबसे effective option।
✔ Low maintenance और long-life stable resistance value देता है।
4. Maintenance-Free Earthing Rods
यह modern earthing system है—
✔ Copper bonded rod
✔ Pre-filled chemical pack
✔ Fast installation
✔ Testing point ready
Industries, data centers और solar plants में सबसे popular है क्योंकि यह consistent earthing value maintain करता है।
Practical Tip: Soil resistivity test करके सही type चुनो—तभी सही performance मिलेगा।
Earthing Pit Installation — Step by Step Guide
Earthing Pit का installation हमेशा proper method से किया जाता है ताकि fault current safely जमीन में dissipate हो सके। इसके लिए पहले moist या shaded ground select की जाती है, फिर लगभग 3 feet चौड़ा और soil condition के हिसाब से 8–12 feet deep pit खोदा जाता है। इसके अंदर copper या GI plate vertically install की जाती है और उसे earthing strip या rider conductor से अच्छी तरह welding या bolting द्वारा जोड़ा जाता है।
इसके बाद pit को alternate layers—charcoal, salt और moist soil—से backfill किया जाता है ताकि conductivity improve हो और earthing resistance value कम रहे। कई installations में एक watering pipe भी लगाया जाता है जिससे dry season में pit को moisture supply मिलती रहे।
सबसे ऊपर inspection chamber बनाया जाता है जिसमें testing terminal accessible रहता है, ताकि yearly earthing resistance testing आसानी से की जा सके। Installation complete होने के बाद earth tester से value check की जाती है—ideal range 1 से 5 Ohm मानी जाती है ताकि system shock और fault से सुरक्षित रहे।
Earthing Pit Testing कैसे करें?
Earthing Pit testing का purpose यह check करना होता है कि ground connection fault current को कितनी आसानी से absorb कर सकता है। सबसे commonly Megger Earth Tester या Three-Point/Three-Probe method use किया जाता है। इस test में दो auxiliary spikes जमीन में कुछ दूरी पर insert किए जाते हैं और एक terminal earthing pit से connect किया जाता है;
फिर tester resistance value measure करता है। Ideal reading 1–5 Ohm के बीच होनी चाहिए — इससे system safe माना जाता है। Basic level पर multimeter से continuity test या voltage drop भी check किया जा सकता है, लेकिन accurate result के लिए dedicated Earth Tester ही best है।
Installation के बाद और साल में कम से कम एक बार testing करना जरूरी है ताकि earthing हमेशा active और effective बनी रहे, खासकर rainy season के बाद reading जरूर verify करें।
Conclusion
Earthing Pit electrical system का सबसे अहम हिस्सा है—क्योंकि यही वह रास्ता है जिससे fault current सुरक्षित तरीके से जमीन में जाता है और shock, fire और equipment failure से बचाव होता है। एक सही earthing तभी possible है जब pit depth soil condition के हिसाब से रखी जाए, proper backfilling किया जाए, joints secure हों और yearly testing की जाए।
याद रखो—3 feet चौड़ाई और 8–10 feet depth एक safe standard है, लेकिन dry या rocky soil में 10–12 feet ज्यादा effective रहती है। Installation के बाद earthing resistance value 1–5 Ohm range में होनी चाहिए—यही professional quality और safety का symbol है।
अब आपकी बारी! Comment में बताइए—आपने field में कितनी depth का Earthing pit बनाया है और किस soil में best result मिला?
और अगर आप Earthing, MCB, wiring diagram, load calculation, inverter connection और practical field formulas को step-by-step सीखना चाहते हैं— तो हमारी Electrician Guide Book ज़रूर पढ़ें, जो specially नए electricians और ITI students के लिए बनाई गई है